4.8 Star Google Review
3 Year Warranty + Lifetime Support
Free Shipping Across the US
10,000+ Units Sold Worldwide
30-Day Money-Back Guarantee

OPTIMOVER
PERFORMANCE
& CAPABILITY
Engineered in Australia, Optimover uses a planetary gearing system and high amperage draw with a quality motor. This combination, unique to Optitec, allows Optimover to achieve incredible power from a compact and low-weight machine.
The quality materials and parts used in the Optimover means this machine continues to operate to an exceptional standard after many years in use.
Optimover easily handles trailers, boats, and RVs weighing between 1,100 and 7,700 lbs, with a maximum tongue weight of 770 lbs.
Optimover handles both single and tandem axle trailers, even tight turns in confined spaces.
For tandem axle trailers with full off-road tires, Optimover still delivers powerful movement, though the turning circle may be slightly wider compared to standard tires.
Optimover is built for Real-World conditions, including moderate slopes and inclines
As a guideline, it can move a 5,500 lb (2.5 ton) trailer up a 10% grade (approx. 6° incline) — that’s a 3.3 ft rise over 33 ft — on solid concrete. Performance on slopes may vary depending on your trailer’s weight distribution and the surface material (e.g., concrete, grass, or gravel).
If you’re planning to use OptiMover on an incline, we’re happy to help. Contact us for advice by emailing [email protected]
Optimover’s solid rubber tire is designed to handle various terrain types. It performs best on concrete, pavers, or compact aggregate, but it can also operate on dry, firm grass or compacted gravel.
For softer surfaces, like loose gravel or damp grass, a little creativity goes a long way. 4WD recovery tracks or timber planks can help improve traction when needed.
Curious if Optimover will work at your location? Check out our videos or contact us for advice by emailing [email protected]
Optimover is equipped with a built-in dynamic brake for maximum safety. As soon as you release the forward or reverse button, the brake automatically engages — locking the wheel and holding your trailer in place. It will never free-wheel or roll away.
Note: Optimover operates independently of your trailer’s braking system.
While performance may vary based on trailer size and weight, we generally do not recommend using Optimover on slopes greater than 10% (approx. 6° incline).
SET UP & INSTALLATION
Optimover mounts to your trailer just like a standard jockey wheel using a clamp attachment — no professional installation needed. You can attach or remove it in under five minutes, making it quick and convenient to use across multiple trailers
The Optimover can be fitted to any trailer drawbar using a jockey wheel clamp. Optitec sells a wide variety of clamps to fit many different size drawbars.
See our clamp size guide to find the most suitable clamp for your trailer. There are only limited clamps available in the US at the moment, but if you require a different size, please contact us at [email protected]
To connect your Optimover, your drawbar will need to be raised or lowered to be between 16in and 25in from the ground.
When operatng the Optimover, your drawbar should be able to be raised or lowered between 16in and 20in height from ground to allow for effective operation.
For trailers weighing over 3,300 lbs (1,500 kg), we recommend using a heavy-duty double clamp to ensure the Optimover remains firmly secured with zero pole movement during operation. Optimovers custom clamps are purpose-built for this exact need.
👉 View our clamp size guide to find the right fit for your trailer. Not all clamps are available in the US yet, if you require a different size please contact us at [email protected]
Optimover runs on a standard 12V power source. By not including an internal battery, Optimover stays lighter, more compact, and more durable over time.
Using the connection leads provided, you can power Optimover in three ways:
Connect to your RV or trailer battery via an Anderson plug — as long as it’s wired to output power.
Connect directly to a 12V deep cycle battery — we recommend a minimum of 80Ah capacity.
Use a 12V jump starter or portable power pack – as long as it can continuously output 50amps
PEACE OF MIND
Optimover is incredibly safe to operate with a dynamic brake (auto-locking wheel), under and over-voltage protection and over-heat protection. It’s a tried and tested machine in use for over 15 years.
Optimover provides a 3-Year Parts Warranty commencing from the date of purchase.
Beyond the warranty period, Optitec offers a lifetime of support to address any concerns that may arise. We are proud to say that many customers have owned their Optimover for over 15 years.
Optimover was designed and engineered in Australia in 2008 to meet the unique requirements of Australia’s largest trailers and terrain.
Optimover USA leverages the best engineering and continues to strive for perfection in product quality and customer service as we expand sales across the globe.
Ready to get moving?
Free US shipping. 3-year warranty + lifetime support. 30-day money-back guarantee.
Clamp Size Guide
Optitec recommends a heavy duty double clamp for moving trailers and caravans over 1500kg. There are numerous clamps available to fit different size drawbars.
Finding your perfect clamp:
Step 1. Locate the best position on your drawbar to place the bracket; the Optimover is effective anywhere on the front drawbar where space allows.
Step 2. Measure the drawbar height.
Step 3. Measure the drawbar width.
Step 4. Use the size guide below to select your bracket.
Bold - Available in the US, contact us at [email protected] if you require a different sized clamp
To Fit | Clamp Dimensions | Additional Notes | |||||
Clamp | Name | Drawbar Height (mm) | DrawbarWidth (mm) | Total Width | Front Plate height x width | Width between U-bolts (mm) | |
OW-15 | Large Compact Duel Clamp 150mm | 150 | 50 | 160 | 150 x 140 | 140 | Most common fit for caravans |
OW-14 | Small Compact Duel Clamp 100mm | 100 to 130 | 50 | 150 x 140 | 140 | Most Jayco caravans (not the all-terrain) | |
OW-6 | Large Duel Clamp 150mm | 150 | 50-150 | 237 x 200 | 195 | Alternative to OW15 where drawbar width is larger than 50mm. U-bolts from the back fit better. | |
OW-7 | Small Duel Clamp 100mm | 100 | 50-100 | 235 x 170 | 195 | Ideal for boats (can go back-to-back with existing jockey wheel) | |
OW-8 | Medium Duel Clamp 130mm | 130 | 50-130 | 237 x 200 | 195 | Ideal for boats (can go back-to-back with existing jockey wheel) | |
OW21 | X Small Duel Clamp 75mm | 75 | 50-75 | 235 x 170 | 195 | Ideal for boats (can go back-to-back with existing jockey wheel) | |
OW-18 | Double Clamp Brack ALKO | NA | NA | 150 x 140 | NA | European & UK vans that use an Alko Chassis | |
OW-19 | Optitec Offset Double Clamp | 100 or 150 | 50-150 | 237 x 200 (150 mm plate) 235 x 170 (100 mm plate) | 195 | Used to get higher or lower (ie. in a carport) Raise or lower by 150mm Can be fitted to 150mm depth or 100mm depth | |
OW20 | Zone RV Dual clamp | TBC | |||||